|
|
SolidWorks Tips & Tricks sponsored by
ProFab
More tips...
Turn Off Sketch Relations Flags to See the Sketch Better
When working in a sketch, sketch relations are very useful. A small flag
appears in the sketch indicating which sketch relation was used and
where. Sometimes, though, these small flags can add up and make it
difficult to see sketch entities, as shown in Figure 1. SolidWorks allows you to control the
display of the Sketch Relation flags. To hide these, pull down the
"View" menu and pick Sketch Relations., as shown in
Figure 2. If you need to see the
Sketch Relation flags, simply pull down the “View” menu and pick
Sketch Relations again.
Figure 1
Figure 2
(June 22, 2006)
More tips...
|
|
